|
|
 |
Please
click image to order a catalogue.
|
 |
CS
Standard Series Clutches
The standard series of clutches are available in 8 sizes offering three modes of operation,
simple overload, synchronous overload, and safelift, and in 7 sizes of the total
dis-engagement design. All are available with three methods of supporting drive
sprockets, pulleys, or gears, to provide flexibility in application design.
Type A - allows simple connection of a driven gear with its own bearing support.
Type B - has an integral needle roller bearing providing full support of driven gear.
Type C - has extended inner race to mount larger pulleys with plain bearings.
Up to four torque ranges are available on each size of clutch, controlled by selection of the
actuating spring set, providing a wide range of torque capacities to select from.
Inertias are provided for each half of the clutch in dis-engaged condition, the hub inertia
incorporating all items that revolve free with the hub, and the flange inertia all those items
that stay with the flange connection.
CS Standard Series Clutches PDF Catalogue
|
|
Cross
CS Standard Series Overload Shaft Couplings
For
shaft to shaft connection CS Standard series clutches are
available with an elastomeric coupling for all the sizes and
modes of operation, simple overload, synchronous overload, or
safe lift and total dis-engagement.
The elastomeric Coupling permits up to 1/2 degree angular
misalignment, with 0.3mm radial and a maximum of 0.5mm axial.
The rubber element absorbs peak shocks, providing greater
accuracy in overload protection. Up to five torque ranges
are available on each size of clutch, controlled by selection
of the actuating spring set, providing a wide range of torque
capacities to select from. Inertias are provided for each half
of the clutch in dis-engaged condition, the hub inertia
incorporating all items that revolve free with the hub, and
the coupling inertia all those items that stay with the
flexible coupling.
Cross CS Standard Series Overload Shaft Couplings PDF Catalogue
|
 |
|
|
 |
CS
Mini Series Clutches
The
CS Mini series of clutches is available in 4 basic sizes with
simple overload, and synchronous overload facility. These lower
cost units are offered with two methods to attach sprockets,
gears, or pulleys.
Type E - allows connection of driven gear with its own external bearing support.
Type F - has extended inner race suitable to mount larger pulleys with a bronze or needle roller bearing.
Four torque ranges are available on standard units, and three on
the synchronous version, providing a wide range of torque capacity
to select from.
The series is suitable for moderate speed applications with low
radial forces and infrequent tripping. The design is suited to
inline stop switch, or proximity switch.
CS Mini Series Clutches PDF Catalogue
|
|
|
CS
Mini Series Couplings
For
For shaft to shaft connection CS Mini series clutches are available
with an elastomeric coupling for all the sizes and modes of operation,
simple overload, synchronous overload.
The elastomeric Coupling permits up to 1/2 degree of angular
misalignment, with 0.3mm radial, and a maximum of 0.5mm axial.
The rubber element absorbs peak shocks, providing greater accuracy
in overload protection.
Up to four torque ranges are available on each size of clutch,
controlled by selection of the actuating spring set, providing a
wide range of torque capacities to select from.
The series is suitable for moderate speed applications with low
radial forces and infrequent tripping. The design is suited to
inline stop switch, or proximity switch.
CS Mini Series Couplings PDF Catalogue
|
 |
|
|
|
|
|
|
| |
