|
 |
Please
click image to order a catalogue.
|
 |
H-V
and RPV Inverted Tooth Chain
Morse H-V Chains provide the
designer with a new concept
for the transmission of high
torques with high shaft speeds.
Smooth running drives, with
low noise level, transmit up
to 4000 kW with shaft speeds
up to 12,000 rpm. Proved in
a wide range of applications
from Automotive Transmissions,
to flood control pumps. Chain
offers many design advantages
over gears, roller chain or
timing belt drives, saving both
space and cost.
HV-RPV Inverted Tooth Chain PDF Catalogue |
 |
H-V
and SC Inverted Tooth Chain
The very latest HV design Inverted
Tooth Chains provide the engineer
wide scope in design for the
transmission of high torques
at high shaft speeds. Ranging
from 3/8" to 2" pitch the chains
can transmit up to 4000kw with
shaft speeds up to 12000rpm.
Proved in applications from
Automotive Transmissions to
Flood Control Pumps, HV chain
offers design advantages over
gears, roller chains and timing
belt drives.
Now, in addition to standard
outside guide chains to inch
dimensions, RPV chains are available
to HV format with centre guide
to metric widths; with special
guiding for vertical shaft drives.
The earlier design of SC inverted
Tooth Chains, conforming to
ANSI standard dimensions, are
available from 3/16" up to 2"
pitch with widths up to 16 inches.
Chains can be supplied with
standard centre guide or with
outside guides on quick delivery.
For applications requiring drive
from both sides of the chain
the double-sided Serpentine
Chains and bi-flexing chains
are available in 3/8", ½" and
¾" pitches.
SC Silent Chain PDF Catalogue |
|
|
 |
Inverted
Tooth Conveying Chains
The
Inverted Tooth form of this
series of Conveyor Chains driving
on the flank angle of the sprocket,
reduces chordal effects giving
a smother transportation, coupled
with improved timing and synchronisation.
This enables faster production
rates to be achieved.
The
smooth back of the chain provides
the ideal conveying surface
for all forms of glassware,
automotive components, castings,
timber and many more. Special
attachments can be built into
the chain where specialist conveying
is required. The hardened links
also exhibit high resistance
to wear.
Inverted Tooth Conveyor Chains
can be operated either individually,
in pairs or in multiple lanes
for wide components.
The Single Oval Pin design
is particularly suited to
bad environmental areas, requiring
little or no lubrication,
yet giving a long service
life with minimal maintenance. |
|
|
|
|
|
|
| |
 |
|
